MacDon How To - C Series Corn Header - Combine Auto Header Height Calibration

Quinn walks you through how to calibrate your C Series Corn Header Auto Header Height Control system on a New Holland Combine. This process also applies to FC Series FlexCorn™ Headers.

 

TRANSCRIPT:

Hi, my name is Quinn from MacDon Industries. I'm the product support specialist for corn headers and today we're on a New Holland CR9.90 running through an auto header height calibration with the MacDon C Series auto header height system.

To calibrate the MacDon corn header with a MacDon auto header height system, we're going to navigate into the calibrations area of the display. Select header from the dropdown and then following the instructions on the combine display. It's going to ask me to pulse the header down button. Pressing the header down button will lower the header to the ground. Note, watch your auto header height dongles um to make sure that they don't stab. If during the calibration your sensor dongle gets stuck, we just want to be driving forward slowly and that sensor arm will come over and your calibration should complete. Now the display is asking me to put pulse the header up switch. Header is coming up. It's going to raise slowly, feel the dongles against the ground, and then find out what its maximum working height is. And the combine's just going to run some calibrations and determine the header weight. Display is asking me to pulse the header down again. Pulsing the header down. Again, watch to make sure your dongles don't stick. We're good. They made it. And that's kind of it on these guys. 
 



RELEVANT LINKS

Visit our product page to learn more:
C Series Corn Header

Additional Resources:
MacDon Performance Parts
Owners Resources
How To Video Library
MacDon Dealer Locator

Outras histórias

MD 0053 V Monthly Performance Story Winter Checklist Oct2026 Web Thumbnail

Essential Maintenance for Winter Storage

As winter approaches, preparing your harvest machines for storage is vital to prevent rust, seized parts, and costly repairs.

MD How To Draper Deck Seal Story Thumbnail

MacDon How To – FD2 FlexDraper® Header – Deck Seal Adjustment

Quinn walks through how to check and adjust the deck seal for your FD2 FlexDraper® Header (model year 2020 - 2026). A proper seal reduces unnecessary wear on the draper, and reduces seed-loss while cutting. This process also applies to D2 Series Draper Headers.

MD How To C Display Configuration Story Thumbnail

MacDon How To - C Series - IntelliView™ IV Display Configuration

Quinn walks you through how to set up and configure a C3012c Corn Header (30 inch, 12 row, chopping) on a New Holland CR 9.90 Combine Display. These settings are recommended starting points, and can be adjusted based off of user preference feed back from the field.

Don't Miss Out!

Get MacDon news, offers, product announcements, and more directly to your inbox.

edit go to cp PDF Link