Our engineers worked hard to make the PW8 as user friendly as possible, from easy installation to time saving innovations, it all adds up to harvesting performance you can count on. Here's why the MacDon PW8 is the smartest no-brainer on the market.
A strengthened auger tube and robust chain drive allow the PW8 to easily handle high capacity loads. Hydraulic motors run both draper decks independently. The drapers are kept on track by MacDon's patented V-guide roller groove tracking system. Together these systems allow the PW8 to process the heaviest swaths with ease.
The PW8 works with the combine's Automatic Header Height and Lateral Tilt System.
A simple draper tensioning system, easy to see draper tension indicators, and common all metric hardware allow adjustments to be made in a flash.
DROP-AND-GO Float Performance
Our simple and effective spring-over-shock floatation system provides a ground following 18" (45.7 cm) of wheel float, and requires no adjustment during operation or lockout during transport. Float indicator numbers are clearly visible on both sides of the machine, letting you know the PW8 is operating at an optimum float position.
Switch combine brands with MacDon PW8 completion packages. These packages make it easy to switch between combine brands, which increases resale value down the road.
|Weight||3,200 lbs. (1452 kg)|
|Overall Width||18 ft. 6 in. (566 cm)|
|Effective Picking Width||14 ft. 8 in. (452 cm) between divider lugs|
|Overall Depth||96.9" (246 cm)|
|Auger Diameter||24" (61 cm)|
|Auger Fingers||Factory set for 18, qty to match specific combine feeder house|
|Auger Speed||0-200 rpm (Depending on combine model)|
|Auger Drive Chian||Endless #80 chain|
|Drive Shaft||Heavy duty, 1.375" diameter, fully shielded with built in clutch|
|Draper Belts||Each deck consists of (4) 44.3 in. (1125 mm) wide drapers joined and equipped with patented tracking V-guide on right end|
|Draper Speed||0-35 ft/min (10.7 m/min), depending on combine model|
|Draper Fingers||5" plastic|
|Draper Rollers||Large 5" (127 mm) drive and 4" (102 mm) idler roller (same on both decks) with V-Groove on right hand side to ensure proper draper tracking and reduce slippage|
|Draper Drive||Two 5.9 CID (97 cc) hydraulic motors|
|Guage Wheels||18.5/8.50 x 8 adjustable height|
|Header Float||Spring-Over-Shock System requires no adjustment or lock-out for transport and provides 18 inches of wheel float|