
“Last year, we ran six windrowers, but this year we ran only three units - two new MacDon M200s with R80 Rotary Disc headers and one older windrower which we only used to open the fields. When the weather turned hot, our crops ripened faster and our normal three week harvest turned into two. I was worried that we would not be able to do it with just two machines but they kept up just fine, primarily because of their increased speed on the highway and in the field. In the field we were running on average 10 to 10.5 miles an hour, and we did peak out at 12 MPH every now and again. As such, we were able to average 250 acres a day and the only limiting factor was the ripeness of the crop. We were also able to save time on maintenance. Because the R80 is hydraulically driven, doesn’t have knives or guards, and we only had three instead of six units to service, we were able to get out there cutting sooner than normal and add two hours cutting a day.”
Denver Pugh / Shed, OR
Farms 2,800 acres of grass seed and grain
Owns two M200 Windrowers with R80 Rotary Disc headers
Producer’s comments
SP Draper Windrowers
- Henry Rumpf
D60-D Draper Header - Murray Taks
D60-S Draper Header - Lorne Carr
D60-S Draper Header - Don Lidgerwood
972 Harvest Header® - Don Schiermeier
972 Harvest Header® - Jaden Blach
972 Harvest Header® - Jaden Blach
9352c Turbo Windrower with 972 Harvest Header®
SP Auger Windrowers
- Brad Schnoor
M150 SP Windrower with A40-D Auger Header - Scott Zeigler
933 Grass Seed - Kent Doerfler
933 Grass Seed - Jaden Blach
9352c Turbo Windrower with 922 Auger Header - Mike Mader
Double Windrow Attachment
SP Disc Windrowers
- Dan Lamb
R80 Rotary Disc Headers - David Sharp
M200 SP Windrower with R80 Rotary Disc - Denver Pugh
M200 SP Windrower with R80 Rotary Disc - Lorne Carr
M150 SP Windrower with R80 Rotary Disc
SP Windrowers
- Dan Lamb
M200 Windrower - David Shoemaker
M200 SP Windrower - Murray Taks
M150 Windrower - Lorne Carr
M150 Windrower
Rigid Drapers for Combines
- Henry Rumpf
D60-D Draper Header - Don Boles
D60 Draper Header
FlexDrapers® for Combines
- Darryl Heide
FD70 FlexDraper® - Greg Bigham
FD70 FlexDraper® - Bruce Nelson
FD70 FlexDraper® - Matt Martin
FD70 FlexDraper® - Tim McGrady
FD70 FlexDraper® - Keevin Lemenager
FD70 FlexDraper® - Michael Waldner
FD70 FlexDraper® - David Hermesch
974 FlexDraper® - Peter Niewand
974 FlexDraper® - Peter “Dutchy” Velthuis
974 FlexDraper® - Sandy Campbell
974 FlexDraper®
Pull-Type Windrowers
- Trevor Day
3020 Pull-type Windrower